Shopping with us is easy!

Simply add your selections to the cart. You may also go back to the Prices tab above and select another section.

Press this button to show what your shopping cart contains:

Model
COM-HW-RM2

Rack Mount Professional Hardwire Communicator System for Aquarium

Divers are Protected from Electrical Fault at the Rack Room

Comes with hand-held microphone for local use at rack

Requires DL-SOUNDWEB, CAB-HW-x, Diver Belt Pack, Earphone and MIC-x

DIVELINK Model COM-HW-RM2
Rack Mount Professional Hardwire Communicator System for connection with Public Address System

Rear View

Quantity:

COM-HW-RM2 | 8900 USD | Shipping +150 USD

Two Diver Professional Hardwire Rack Mount System

Model
DL-SOUNDWEB

DIVELINK Model DL-SOUNDWEB
Preprogrammed Interface between COM-HW-RM2 and Public Address System

Quantity:

DL-SOUNDWEB | 4500 USD | Shipping +95 USD

Preprogrammed Interface between COM-HW-RM2 and Public Address System

Model
CAB-HW-x

DIVELINK CAB-HW-x (x=length in feet)
Comes from the Audio Rack Room COM-RM-HW2 and connects with the Diver

(Venues with high throughput performances will order two of these cables for a redundant system to ensure 100% up-time.)

Quantity:

CAB-HW-300 | 2125 USD | Shipping +95 USD

300 Feet Industrial Hardwire Cable with 1" molded connectors

Quantity:

CAB-HW-250 | 1863 USD | Shipping +95 USD

250 Feet Industrial Hardwire Cable with 1" molded connectors

Quantity:

CAB-HW-200 | 1600 USD | Shipping +95 USD

200 Feet Industrial Hardwire Cable with 1" molded connectors

Quantity:

CAB-HW-150 | 1338 USD | Shipping +90 USD

150 Feet Industrial Hardwire Cable with 1" molded connectors

Quantity:

CAB-HW-100 | 1075 USD | Shipping +90 USD

100 Feet Industrial Hardwire Cable with 1" molded connectors

Diver End set up for Full Face Mask in Aquarium

If you are ordering for use with a standard diver full face mask then you will need to order two more parts. The first is called model EAR-MIC-NOPTT which provides the diver with earphones and a volume control. The second is a separate microphone model MPC-xxx to fit properly into the full face mask the diver is wearing. Each of these parts is necessary but may also be ordered as spare parts or to allow several divers to have their own microphone for different masks or for sanitary reasons...

1. Harness EAR-MIC-NOPTT (No Push To Talk switch as this is two way continuous communication) plus a
2. Microphone MPC-see below to suit a particular full face mask.

Order below:

EAR-MIC-NOPTT with MPC-xxx unplugged

Quantity:

EAR-MIC-NOPTT | 499 USD

Now order ONE of the following Microphones for your Full Face Mask:
(or more than one... do you need spare parts? Or do you have more than one full face mask?)

Quantity:

MPC-AGA | 249 USD | Shipping +30 USD

Quantity:

MPC-DRAGER | 249 USD | Shipping +30 USD

Quantity:

MPC-EXO | 249 USD | Shipping +30 USD

Quantity:

MPC-KM48 | 249 USD | Shipping +30 USD

Quantity:

MPC-MANTIS | 249 USD | Shipping +30 USD

Quantity:

MPC-POSIEDON | 249 USD | Shipping +30 USD

Quantity:

MPC-REEF | 249 USD | Shipping +30 USD

Quantity:

MPC-SCUBAPRO | 249 USD | Shipping +30 USD

Diver End set up for SEATREK^® Helmet in Aquarium

If you are ordering communications for the SEATREK^® Helmet then alternate diver side equipment is required.

Model
COM-UC-HW3

Diver Belt Pack

Components needed for diver end using Seatrek^® Helmet and waterproof earbuds

DIVELINK COM-UC-HW3
Diver Belt Pack plugs into microphone and disposable waterproof earbuds

Quantity:

COM-UC-HW3 | 750 USD | Shipping +69 USD

Diver Belt Pack for Seatrek Helmet

Model
MIC-SEATREK

Waterproof Microphone for SEATREK^® Helmet System

Diver with Seatrek^® Helmet and MIC-SEATREK

DIVELINK Model MIC-SEATREK
Headset Microphone for Aquarium System using the SEATREK^® Helmet

Quantity:

MIC-SEATREK | 500 USD | Shipping +49 USD

Microphone for SEATREK Helmet System